WENZHOU SANTUO ELECTRICAL CO.,LTD.
Reputation is the first, quality is the priority.
Add to Cart
STRO07-40 residual current circuit breaker is in conformity with the standards of IEC61009.It can cut off the fault circuit immediately on the occasion of shock hazard or earth leakage of trunkline.Thus it is suitable to avoid the shock hazard and fire caused by earth leakage.It can be used in circuits up to single phase 240V,three phase 415V,50 or 60Hz.
Product Over View:
1.Provide protection against earth fault/leakage current and function of isolation
2.High short-circuit current withstand capacity
3.Applicable to terminal and pin/fork type busbar connection
4. Equipped with finger protected connection terminals
5.Automatically disconnect the circuit when earth fault/leakage current occurs and exceeds the rated sensitivity
6.Independent of power supply and line voltage, and free from external interference, voltage fluctuation.
7. Mode: Electrical type, Magnetic type ;
8. Type: A (AC/ DC), AC type
Specifications
| Model | Electronic type/magnetic type |
| Residual Current characterstics | A AC |
| Pole No | 2P/4P |
| Rated Current(A) | 16A,20A,25A,32A,40A |
| Rated Voltage(V) | 240/415V |
| Rated residual operating current | 10ma,30ma,100ma,300ma,500ma |
| Rated conditional residual short circuit current | 6KA |
| Electro-machanical endurance | over 4000 cycles |
| Sandard | IEC/EN61009 | ||
| Electrical features | Type(wave form of the earth leakage sensed) | Electro-magnetic type, electronic type | |
| Rated current In | A | A,AC | |
| Poles | P | 2,4 | |
| Rated voltage | V | AC 240/415 | |
| Rated Current : | 10,16,20,25,32,40A | ||
| Rated sensitivity I△n | A | 0.01,0.03,0.1,0.3,0.5 | |
| Insulation voltage Ui | V | 500 | |
| Rated residual making and breaking capacity I△m | A | 630 | |
| Short-circuit current I△c | A | 6000 | |
| SCPD fuse | A |
| |
| Rated frequency | Hz | 50/60 | |
| Pollution degree | 2 | ||
| Mechanical features | Electrical life | t | 4000 |
| Mechanical life | t | 10000 | |
| Protection degree | IP20 | ||
| Ambient temperature (with daily average ≤35℃) | ℃ | -25~+40 | |
| Storage temperature | ℃ | -25~+70 | |
| Installation | Terminal connection type | Cable/U-type busbar/pin-type busbar | |
| Terminal size top/bottom for cable | mm2 | 25 | |
| AWG | 18-3 | ||
| Terminal size top/bottom for busbar | mm2 | 25 | |
| AWG | 18-3 | ||
| Tightening torque | N*m | 2.5 | |
| In-lbs | 22 | ||
| Mounting | On DIN rail EN 60715(35mm)by means of fast clip device | ||
| Connection | From top and bottom | ||
Our services have competitively price,we can provide after sale service,our product quality are very good,it has a long life<br>